Num'axes Cellular Camera Trap 4G

• Viewing angle: 60°
• PIR sensor (motion detector):
  • Detection angle: 60°
  • Detection distance: about 20 m
  • Adjustable detection sensitivity: low | medium | high
• Infrared flash:
  • 60 invisible black LEDs
  • Range: about 20 m
  • Ability to adjust flash power (high | low).
  • Automatic infrared flash activation based on brightness
• Photo sending:
  • via MMS: you can send them to 1, 2, 3 or 4 mobile phone numbers
  • via Email: you can send them to 1, 2, 3 or 4 email addresses
• Ability to set and trigger the device remotely using a free mobile app (available for Android and iOS - App name: NumCam)
• When inserting the SIM card, the device automatically detects the mobile operator and configures the corresponding MMS/Email sending parameters.
• Capture modes:
  • Photo
  • Video with audio: programmable duration of 5 to 59 seconds
  • Photo + Video with audio: a photo followed by a video is taken with each trigger
• Photo resolution: 5 MP | 8 MP | 12 MP | 24 MP | 32 MP
• Video resolution: WVGA | HD 720P | Full HD 1080P
• PIR detection mode (triggered by motion detection): the device takes photos or videos when the passive infrared sensor (PIR - motion sensor) detects activity in its coverage area
• Time Lapse mode: photos or videos are taken automatically at regular intervals defined by the user.
• Hybrid mode: motion detection operation + Time Lapse operation simultaneously
• Programmable operating time slots: the device can operate 24/7 or only during one or two daily time slots defined by the user.
• Photo tagging: time, date, temperature, lunar phase, device name (if the user has programmed one), battery level
• Memory: SD or micro SD card with adapter with a capacity of 8 GB to 128 GB maximum, class 10 minimum (not included). You can acquire micro SD cards with adapter at any time on this website.
• User-programmable looping recording on memory card: when the memory card is full, the camera records new photos/videos by deleting the oldest ones.
• Programmable device name: allows you to identify where and by which device a photo was taken, which can be very useful if you have multiple devices.
• Programmable password

Reliable and efficient

• Designed to withstand the elements (IP66)
• Trigger speed: about 0.4 seconds

Ergonomics of the Num'axes 4G camera trap

• Weight: 302 g (without batteries) - 479 g (with batteries)
• Dimensions: 128 x 96 x 76 mm
• Power supply: 8 AA batteries (alkaline, lithium or rechargeable Ni-MH - not included) - You can acquire batteries at any time on this website.
• External power possible as an option: 12V power supply or 12V solar panel - You can acquire these products at any time on this website.
• 2.4-inch (approx. 6 cm) colour LCD screen: to facilitate settings and view photos and videos
• USB Type-C port for file downloading

Below are some tips for installing your camera trap in the field:

• Install the device at about 1.5 m/2 m height, slightly angled downwards.
• Install the device facing north or south. Do not point the device east or west as sunrise and sunset can cause false triggers and produce overexposed images.
• To monitor a game trail, point the device along the trail rather than perpendicularly. This allows for multiple animals to be seen at the same time if they pass in a line.
• Avoid placing the device on a frail tree that may move in high winds. Try to place the camera on a stable and fixed support.
• Clear any branches or grass in front of the device. In high winds or temperatures, they might cause false triggers.
• Check the battery status before setting up the device.
• Make sure you have properly inserted the memory card.
• Check that the date and time are correct.
• Remember to switch the selector to "ON" before you leave.