BMX helmets for the track and dirt

Clear, tinted or iridium lens: choose according to light

The lens is chosen based on the daylight and track conditions. A clear lens lets in the maximum light: it’s suitable for covered tracks, evening sessions under lights, and dull days when a tinted lens would obscure the bumps’ relief. The tinted lens reduces glare in bright sunlight, while the iridium lens, with its mirror coating, reflects some of the light and provides greater protection from reflections on a bright track. Most lenses are made from polycarbonate, a material that resists dirt and gravel projections. Many riders keep a spare lens on hand to adapt from one heat to another.

The rest of the gear

BMX equipment also comes in various forms:

• BMX helmets.
• Gloves.
• Jerseys.
• Pants.
• Protective gear.
• BMX shoes.

All the equipment is gathered on the BMX page.

Foam, ventilation, and glasses wearers

Contour foam ensures both comfort and waterproofing: often made from several layers of different densities, it molds to the face and absorbs sweat before it reaches the eyes. Vents, protected by a fine mesh, renew the air behind the lens without letting in dust, and limit fog formation during exertion. Riders who wear prescription glasses choose a goggle with a wide internal volume, with side notches to accommodate the arms: these are known as OTG models, for over the glasses. The fit is tested with the glasses on the nose and the helmet secured.

Tear-offs and roll-offs on a muddy track

On a muddy track, two systems keep the vision clear. Tear-offs are thin transparent sheets stacked on the lens and attached to side studs: the rider pulls the tab of the first one as soon as it gets dirty, revealing a clean surface. The roll-off feeds a continuous film from one cartridge to another by pulling on a cord; it provides a wider vision without waste on the track, but requires compatible lenses. After each session, the lens should be rinsed with clean water on the outside, and left to dry inside without rubbing, to preserve the anti-fog treatment.

Good deals

Good deals can also be found in good deals, promotions, clearance, sales, Black Friday. The new arrivals showcase the latest collections, and items shipped within 24h are prepared and dispatched within 24 hours. The highlights of the year follow a stable order: Black Friday at the end of autumn, the year-end celebrations, the winter sales, the French Days in spring, followed by the summer sales and back to school.

Frequently asked questions

Is a BMX goggle mandatory in competition?

Regulations require a full-face helmet in BMX racing, while goggles are strongly recommended for protection against dirt, wind, and insects. Some riders operate without goggles on dry tracks, risking debris in the eye.

Can a motocross goggle be used for BMX?

Yes, a motocross goggle generally fits full-face BMX helmets, which have a similar opening. Just check that it sits without pressing on the nose and that the lateral vision remains clear.

How can I clean the inside of a goggle lens without damaging it?

Let the inside dry in the open air, then remove dust by gently dabbing with a clean microfiber cloth. Scrubbing or using household products ruins the anti-fog treatment.

Why does my goggle slip on my helmet?

A strap that is poorly tensioned or lacking a silicone strip will slip on the smooth helmet shell. Retightening the strap and ensuring the silicone is clean often restores a good fit.

When should the foam or lens of a goggle be replaced?

When the lens is scratched to the point of obstructing vision or when the foam compresses and lets dust in. A spare lens extends the life of the goggle without needing a complete replacement.