Scooter supports for top case
Starting at £168.43
£144.72
Starting at £164.68
£141.61
Starting at £154.67
£133.32
Starting at £107.98
£94.67
Starting at £46.28
£43.57
Starting at £76.29
£68.43
Starting at £80.88
£72.22
Starting at £46.28
£43.57
Our selection of Scooter Supports brings together top case supports designed for each model: Shad for the Honda SH, the Piaggio Liberty and the Medley, Givi Monolock for the Kymco G-Dink and X-Town City. Each support fixes onto the mounting points located at the rear of the scooter and holds the top case plate, allowing you to carry your helmet and belongings safely.
The top case is essential for scooter riders.
Shad Top Master: a support designed for every scooter
The Shad supports, a brand launched in 1992 by a company from the Barcelona region originally specializing in motorcycle seats, belong to the Top Master range: each kit is designed for a specific model and uses its original mounting points. The one for the Honda SH targets the three hundred cubic centimetre version produced from 2019 to 2021. The one for the Piaggio Liberty covers the fifty and one hundred twenty-five versions produced between 2005 and 2020, and the one for the Medley, Piaggio's large-wheeled scooter, covers the years 2016 to 2020. Once installed, the support receives the Shad plate on which a top case from the brand locks in place.
The rest of the range
The top case is also available in:
Everything is gathered on the top case page.
Givi Monolock: a lightweight system limited to three kilos
The Monolock system from Givi, an Italian brand, has been designed for scooters and smaller engines: its simpler plate and single-wall top cases are lighter than those in the Monokey range, which is intended for heavier motorcycles. In return, the load allowed in a Monolock top case is limited to three kilos, compared to ten for a Monokey: just enough to carry a jet helmet and a lock, not much more. The supports available fit the Kymco G-Dink, from one hundred twenty-five to three hundred cubic centimetres, in its versions from 2012 to 2017, and the X-Town City in its 2020 version.
Check compatibility before ordering
A support is first chosen based on the registration certificate: brand, model, engine size and year of first registration, as the same name of scooter can change frame from one generation to another. It is then necessary to check that the plate system corresponds to the intended top case: a Shad support only accepts Shad top cases, and a Givi Monolock support only accepts Monolock top cases. Finally, see if the original luggage rack needs to be removed or kept: the instructions specify this. Installation is done with standard tools, tightening each screw to the specified torque and checking the tightness after the first few kilometres.
Good deals
Good deals can also be found in the good deals, promotions, clearance, sales, Black Friday. The new arrivals showcase the latest collections, and items shipped within 24 hours are prepared and dispatched in 24 hours. The major events of the year follow a stable order: Black Friday at the end of autumn, the year-end holidays, the winter sales, the French Days in spring, followed by the summer sales and back to school.
Frequently asked questions
Do I need to drill the bodywork to mount a top case support?
In the vast majority of cases, no: the support uses the mounting points provided by the manufacturer, often those of the original luggage rack. The instructions indicate the rare models that require cutting the fairing.
Can the support be left in place without the top case?
Yes, the support and its plate remain attached to the scooter: the top case is unlocked with a key and removed in seconds. The bare plate remains discreet and does not obstruct the passenger or the seat opening on most models.
Does a top case affect a scooter's handling?
Located behind the wheel, it shifts weight to the rear and can lighten the front slightly. When loaded reasonably, it changes almost nothing; if too heavy, it makes the steering less precise at low speeds.
How do I maintain a top case support?
Check the tightness of the screws every few months because vibrations can loosen them. Rinse off any salt residue in winter and occasionally lubricate the plate lock with a dry product.
Does the Shad support for the Honda SH fit other engine sizes of the model?
Not necessarily: the one hundred twenty-five and three hundred versions of the SH do not always have the same rear. Check the engine size and exact year listed on the sheet before ordering.
