BMX race and dirt masks

Why wear a mask under a full-face helmet

On a BMX race track, up to eight riders launch from the starting hill and compete for the first corners, wheel to wheel: the dirt kicked up, gravel and the wind from speed go straight for the eyes. The mask, fitted into the opening of the full-face helmet, creates a continuous barrier around the eyes, preventing air and dust from coming in from the sides. It also protects against branches or dirt splashes. Derived from motocross, it’s chosen with the same care: a lens that doesn’t distort, foam that contours the face, and a strap that stays in place on the shell.

The rest of the gear

BMX gear also includes:

• Helmets.
• Jerseys.
• Pants.
• Gloves.
• Protective gear.
• Shoes.

All the gear can be found on the equipment page.

Lens, tint and foam: the criteria for a good mask

The lens made from polycarbonate absorbs impacts without shattering; its inner surface usually has an anti-fog treatment. A clear or yellow lens brightens up shadowy tracks and late-day sessions, while a tinted or iridium lens reduces glare in bright sunlight. Masks that conform to the EN 1938 standard, for motorcycle goggles, have been tested for impact resistance. The foam, often layered in three pieces, absorbs sweat and filters dust while allowing air to circulate through the frame's vents. A wide strap, lined with a silicone coating, grips the helmet shell without slipping.

Tear-offs, roll-offs and lens maintenance

Tear-offs are thin transparent sheets stacked on the lens and attached to its posts: when mud obscures the view, the rider can rip one off in a single motion. However, some tracks and competitions restrict them, as discarded films can end up in the nature. The roll-off system then takes over: a continuous film unravels from one cassette to another when a cord is pulled, ideal for very muddy conditions. After the session, rinse the lens with clean water, pat it dry with a microfibre cloth, avoid rubbing the interior to preserve the anti-fog treatment, and let the foam air dry.

Good deals

Great deals can also be found in the good deals, promotions, clearance, sales, Black Friday. The new arrivals showcase the latest collections, and items shipped within 24 hours are prepared and sent out in that timeframe. The key events throughout the year follow a stable order: Black Friday in late autumn, the end-of-year holidays, the winter sales, French Days in spring, then the summer sales and back-to-school.

Frequently asked questions

How to check if a mask is compatible with a full-face helmet?

Try it on with the helmet on your head: the frame should fill the opening without leaving a gap above the nose or pressing on the bridge. The strap goes behind the shell and shouldn’t lift the mask towards the forehead.

Can a BMX mask be worn with prescription glasses?

Some models called OTG, for over the glasses, have a deeper frame and notches in the foam to accommodate the arms. Without this design, prescription lenses press on the nose and fog up quickly.

Is a motocross mask suitable for BMX?

Yes, the design is the same and many BMX riders use a motocross mask. Look for a lightweight and well-ventilated model, as pedaling creates more sweat than riding a motorcycle.

How to prevent fogging in a BMX mask?

Keep the mask on your face instead of lifting it to your forehead between races, where it can gather moisture. Never wipe the inside of the wet lens, and let it air dry after the session.

When should the lens or foam of a mask be replaced?

As soon as the lens is scratched to the point of scattering light or if the anti-fog treatment stops working, it should be changed: most masks accept replacement lenses. Compressed or detached foam lets dust in and should also be replaced.